Sonic 2-Cycle Engine Oil

Description

Sonic Two-Cycle Oil is a quality 2-cycle oil that is recommended for both air cooled and older water cooled 2-cycle engines.  It is formulated to met the requirements of low ash applications.  Although predominantly used in tank mix applications, it may be injected in specific equipment.

Application

Sonic Two-Cycle Oil is recommended for use in 2-cycle engine requiring a fuel/oil ration of 50:1 or less and a NMMA low ash formulation.  Sonic Two-Cycle Oil can be used in chain saws, lawn mowers, snow throwers and utility motors that require a 2-cycle engine oil.  In all cases the manufacturer's recommendations should be consulted.

Note: Do not use this product in equipment that calls for a synthetic 2-cycle engine oil.

Performance Features

Sonic Two-Cycle Oil provides the following performance features:

1. Prevents piston scuffing
2. Minimize ring sticking and spark plug fouling
3. Minimize rust, corrosion and exhaust system deposits
4. Eliminate pre-ignition
5. Pre-diluted for easier mixing at all temperatures
6. Qualified TC and low ash

Availability

Sonic Two-Cycle Oil is available in 1 litre and 500 mililitre bottles (12 per case).

Typical properties

Mixing Table*

*The body of the table shows the amount of oil that must be added to obtain the gasoline to oil ration (1 litre = 1000 mL)